You can create custom visualizations in your scenes by applying smart mapping styles to your data. You can choose styles that use attributes to apply continuous colors or individual colors to lines, or choose styles that apply a single color to all the lines.
2D Line
You can apply the 2D Line style when you want to visualize lines with a single color. You can show a network of transportation lines across a city, for example.
- Follow the steps in the Style layers workflow.
- For Color, click the color picker.
- Colors displays general colors from which you can choose.
- Custom color allows you to create a custom color. You can copy the Hex, RGB, and HSV values. Under Saved, apply saved colors, which you can add or remove.
- Fill transparency allows you to set the transparency with the slider or by entering values.
- For Width, choose the width of the lines in pixels.
- For Elevation Mode, see Change elevation mode.
3D Path
Use the 3D Path style when you want to show lines with a single color in real-world measurements by attributes. For example, you can size water main lines across a city by the diameter of the pipes.
- Follow the steps in the Style layers workflow.
- For Profile, choose how to display the line paths and adjust the real-world line size.
- The Profile setting has the following line types:
Tube Displays lines as tubes, such as water pipes or utility lines; diameters are entered in the Diameter setting.
Wall Displays lines as walls, such as walls or fences; vertical heights are entered in the Height setting.
Strip Displays lines as strips, such as streets or railroad tracks; widths are entered in the Width setting.
Square Displays lines as squares, such as tunnels or canals; heights are entered in the Height setting.
- As you change the profile, the measurement type changes accordingly to Diameter, Height, or Width below the Color setting.
- The Profile setting has the following line types:
- For Color, click the color picker.
- Colors displays general colors from which you can choose.
- Custom color allows you to create a custom color. You can copy the Hex, RGB, and HSV values. Under Saved, apply saved colors, which you can add or remove.
- Fill transparency allows you to set the transparency with the slider or by entering values.
- For the Diameter, Height, and Width settings, adjust the line size by attribute or constant value.
- Choose an attribute from the drop-down menu to size the lines. Select <Fixed value> to manually enter a uniform size.
- Choose the measurement unit from the drop-down menu.
- As you zoom in and out, click the Fit to view button
to adjust the lines to be appropriately sized in the current view.
- For Elevation Mode, see Change elevation mode.
2D Counts and Amounts
You can apply the 2D Counts and Amounts style to line data when you want to color lines based on numeric attribute values. You can show a transportation network of lines with continuous color based on traffic volumes, for example.
- Follow the steps in the Style layers workflow.
The 2D Counts and Amounts pane appears with the Mapped Attribute box displaying the specified attribute.
- Move the upper and lower slider handles to adjust the coloring based on the specified attribute.
See Counts and Amounts slider considerations for more information.
- For Color, click the color picker.
- Click Color ramps to choose from a gallery of color ramps.
- Click Reverse ramp colors
to reverse the colors.
- For Width, choose the width of the lines in pixels.
- For Elevation Mode, see Change elevation mode.
3D Counts and Amounts
Use the 3D Counts and Amounts style when you want to apply continuous colors to lines based on a numeric attribute and size them with another attribute. For example, you can size water main lines across a city based on a diameter attribute, while applying continuous colors to the pipes with a flow rate attribute.
- Follow the steps in the Style layers workflow.
The 3D Counts and Amounts pane appears with the Mapped Attribute box displaying the specified attribute.
- Move the upper and lower slider handles to adjust the coloring based on the specified attribute.
See Counts and Amounts slider considerations for more information.
- For Profile, choose how to display the line paths and adjust the real-world line size.
- The Profile setting has the following line types:
Tube Displays lines as tubes, such as water pipes or utility lines; diameters are entered in the Diameter setting.
Wall Displays lines as walls, such as walls or fences; vertical heights are entered in the Height setting.
Strip Displays lines as strips, such as streets or railroad tracks; widths are entered in the Width setting.
Square Displays lines as squares, such as tunnels or canals; heights are entered in the Height setting.
- As you change the profile, the measurement type changes accordingly to Diameter, Height, or Width below the Color setting.
- The Profile setting has the following line types:
- For Color, click the color picker.
- Click Color ramps to choose from a gallery of color ramps.
- Click Reverse ramp colors to reverse the colors.
- For the Diameter, Height, and Width settings, adjust the line size by attribute or fixed value.
- Choose an attribute from the drop-down menu to size the lines. Select <Fixed value> to manually enter a uniform size.
- Choose the measurement unit from the drop-down menu.
- As you zoom in and out, click the Fit to view button to adjust the lines to be appropriately sized in the current view.
- For Elevation Mode, see Change elevation mode.
2D Types
You can apply the 2D Types style to line data to color lines by type based on either text or numeric attributes. You can show a transportation network of lines across a city by type, such as road, rail, bus, or underground.
- Follow the steps in the Style layers workflow.
The 2D Types pane appears with the Mapped Attribute box displaying the specified attribute.
- Modify the Attribute Values list.
The most common attribute values are listed. The remaining attribute values are automatically grouped into the Other section. By default, the attribute values are listed in descending order by the number of features, which is listed next to each attribute value. The total number of features is displayed at the top of the list.
- Click an attribute value to modify.
Do any of the following:
- Change the symbology.
- Drag the attribute value to change the order in the list and in the legend.
- Rename an attribute value by selecting it and clicking the name.
- Click Select all at the top of the list to modify all values.
To return to modifying an individual value, click a value or click Select one at the top of the list.
- Modify attribute values in the Other section.
Do any of the following:
- Change the symbology.
- Drag individual attribute values in and out of the main list
- Click Select all to drag all values.
- Click the show
or hide 
buttons to show or hide features that are in the Other section. By default, these attribute features are hidden. Features that are hidden and dragged to the main list become visible in the scene and in the legend.
Tip:
Ideally, your layer should show fewer than 10 values; more than 10 are difficult for users to distinguish. - Click an attribute value to modify.
- For Color, click the color picker.
- Colors displays general colors from which you can choose.
- Custom color allows you to create a custom color. You can copy the Hex, RGB, and HSV values. Under Saved, apply saved colors, which you can add or remove.
- Fill transparency allows you to set the transparency with the slider or by entering values.
- To apply a color ramp to all the attribute values, click Select all at the top of the Attribute Values list. The solid color picker becomes a color ramp.
- Color ramps allows you to choose from a gallery of color ramps.
- Click Reverse ramp colors to reverse the colors.
- Click Solid color to change to a single color and display the color options.
- For Width, choose the width of the lines in pixels.
- For Elevation Mode, see Change elevation mode.
3D Types
Use the 3D Types style when you want to apply individual colors to lines based on a text or numeric attribute and size them with another attribute. For example, you can size water main lines across a city based on a diameter attribute, while applying individual colors to the pipes with a material type attribute.
- Follow the steps in the Style layers workflow.
The 3D Types pane appears with the Mapped Attribute box displaying the specified attribute.
- Modify the Attribute Values list.
The most common attribute values are listed. The remaining attribute values are automatically grouped into the Other section. By default, the attribute values are listed in descending order by the number of features, which is listed next to each attribute. The total number of features is displayed at the top of the list.
- Click an attribute value to modify.
Do any of the following:
- Change the symbology.
- Drag the attribute value to change the order in the list and in the legend.
- Rename an attribute value by selecting it and clicking the name.
- Click Select all at the top of the list to modify all values.
To return to modifying an individual value, click a value or click Select one at the top of the list.
- Modify attribute values in the Other section.
Do any of the following:
- Change the symbology.
- Drag individual attribute values in and out of the main list
- Click Select all to drag all values.
- Click the show or hide buttons to show or hide features that are in the Other section. By default, these attribute features are hidden. Features that are hidden and dragged to the main list become visible in the scene and in the legend.
Tip:
Ideally, your layer should show fewer than 10 values; more than 10 are difficult for users to distinguish. - Click an attribute value to modify.
- For Color, click the color picker.
- Colors displays general colors from which you can choose.
- Custom color allows you to create a custom color. You can copy the Hex, RGB, and HSV values. Under Saved, apply saved colors, which you can add or remove.
- Fill transparency allows you to set the transparency with the slider or by entering values.
- To apply a color ramp to all the attribute values, click Select all at the top of the Attribute Values list. The solid color picker becomes a color ramp.
- Color ramps allows you to choose from a gallery of color ramps.
- Click Reverse ramp colors to reverse the colors.
- Click Solid color to change to a single color and display the color options.
- For the size of the line, set the measurement values.
- As you change the Profile setting under All lines, the measurement type changes accordingly to Diameter, Height, or Width.
- When an attribute is selected in All lines, the option to individually size lines is unavailable. Set the attribute to <None> to set size individually.
- Enter the size manually and choose the measurement unit from the drop-down menu. As you zoom in and out, you can click the Fit to view button to adjust the symbols to be appropriately sized in the current view.
- Under All lines, choose how to display the line paths in the Profile setting and adjust the real-world line size.
- The Profile setting has the following line types:
Tube Displays lines as tubes, such as water pipes or utility lines; diameters are entered in the Diameter setting.
Wall Displays lines as walls, such as walls or fences; vertical heights are entered in the Height setting.
Strip Displays lines as strips, such as streets or railroad tracks; widths are entered in the Width setting.
Square Displays lines as squares, such as tunnels or canals; heights are entered in the Height setting.
- For the Diameter, Height, and Width settings, adjust the line size by attribute or constant value.
- Choose an attribute from the drop-down menu to size the lines. Select <None> to manually enter a uniform size.
- Choose the measurement unit from the drop-down menu.
- The Profile setting has the following line types:
- For Elevation Mode, see Change elevation mode.
Change elevation mode
You can change the elevation mode to customize the positioning of your layers. Click the Elevation Mode drop-down arrow 
. Options that determine the vertical positioning of the layer and its data appear.
| On the ground | Drapes the layer onto the ground. |
| Relative to ground | Positions the data aligned to the ground elevation. Z-values are added to the ground elevation when available. |
| Relative to scene | Positions the data aligned on top of 3D object scene layers and integrated mesh scene layers, depending on which has a higher elevation. If the graphic is not directly above a 3D object or any other feature, it is aligned to the terrain surface elevation. Note:If present, the geometry's z-value is added to the elevation. |
| Absolute height | Positions the data vertically based on the feature’s geometry z-value position. If the geometry doesn’t contain z-values, the default elevation is sea level. |
| <custom> | Positions the data vertically based on a custom elevation defined in the layer, such as from an attribute expression. The <custom> option is only visible when the layer has custom elevation. |
| Offset | Applies a positive or negative integer value in meters to vertically offset the elevation based on the specified Elevation Mode setting.
Note:Offset is not available for the On the ground elevation mode. |